The Stone Crusher Maintenance

If there is no timely and reasonable to take some protective measures during using, the stone crusher equipment is easy to corrosion or easily appears failure in use process. Thus affecting the working efficiency and can’t reach the expected effect. So no matter the prior or in the use process, the stone crusher always need correct operation.

The inspection and preparation before starting is that to check the lubricating points if they are block or leak and refueling enough via use the operating handle stem. And the other things before start the stone crusher are that checking the meter, adjusting the gape, checking electric interlocking device, checking if the triangle belt and the locking spring elastic are moderate, checking if the facilities are complete and normal and checking the crusher cavity without ores or other crusher matters. All of these operations are the premise to guarantee the normal operation of the stone crusher. These are just preliminary work, of course, we should pay attention to the work during operation of the stone crusher. Firstly, the stone crusher can’t be shut down before all the material discharged. And the feeding system should be stop before shut the stone crusher. The oil pump and the cooling water system can be stop after 5 minutes the stone crusher has been shut down. These are able to maintain the normal operation of the crusher.

On the other hand, each components of the stone crusher has its own range of the temperature in operation. Therefore, the fellow two points should be noted during use process in the stone crusher: first, attention should be paid to the prevention of overload operation under low temperature. It can operate after the machine reaches the specified temperature. Second, the running of the stone crusher at high temperature should be prevented. So in the usual work, pay attention to check the working conditions of the cooling system is very important. And the regularly clean the dust on the air cooling system to ensure smooth flow of cooling air duct is also essential work to ensure the normal operation. Mechanical impurities generally refer to dust, soil and other non-metallic substances and in the course of itself produced some of the metal shavings, wear products and so on.

Due to the damage of the mechanical impurities on the stone crusher is very big, so we should pay more attention to the lubrication and sealing properties. In addition, the phenomenon that the chemical or electrochemical reaction happened between the metal surface and surrounding is called corrosion damage. As to the management and operation staffs of stone crusher, you are advised to reduce the chemical corrosion impact in accordance with the prevailing circumstances. The maintenance should be a long process and only when you know how to maintain or care your machine well, can you use it for a longer service life.

Back to The Latest News