Steps to Operate Impact Crush for Crushing Magnetite

In the common sense, to operate the impact crusher, there are several steps for you to know and understand. We know that the magnetite is a desired form of iron. If you want to make it crushed, the crusher should be used correctly. With the development of nowadays society and technology, the products have been updated into a higher level that you can choose one for your project.

Except for magnetite, hematite, goethite, limonite and siderite are also the typical products. These five types of iron are then processed and sent to steel mills. If we want to make magnetite usable, the several ways are needed.

Firstly, you should mine the magnetite from the ground using explosives. This process will leave the magnetite ore in large chunks, which need to be handled specially. So the impact or stone crusher used.

Secondly, it is needed to use the conveyor or feeder belt to continuously feed the lumps of magnetite into the primary crusher, and usually a jaw crusher. A screen at the output section separates any ore that is small enough, at that point, to go to the secondary crusher. We have mentioned the secondary machine to mill for the purpose of reducing the larger lumps for processing.

Thirdly, feed the magnetite by conveyor belt into the secondary crusher. It is a very important process that you should do the job carefully. This secondary crusher will be an impact crusher. When the step is finished, a sandy ore will be produced.

Lastly, once again using conveyor belts, you are told to feed the sandy magnetite ore into the tertiary crusher. This third crusher should be a cone crusher, and it will produce magnetite powder from the fine sand. Once you have the powder form, the crushing process ends.

To operate impact crusher and other crushers, you can realize your purpose. For more information, you are suggested to visit: www.sanmechina.com It is a reliable supplier for you.

Back to Sanme Crusher News